18CrNiMo7-6 hot rolled steel round bars

18CrNiMo7-6 is a case hardening steel with high toughness. There are a number of variants with high cleanliness requirements. All variants possess tighter composition ranges compared to the standard. produced with the quality class IQ (isotropic quality). This ensures a very low number of elongated sulphide inclusions which will give more isotropic properties. The high oxidic cleanliness will enable the steel to meet the same high cleanliness demands as for re-melted qualities
VIEW MORE +

16MnCr5 hot rolled steel round bars

Steel grade 16MnCr5 is used for surface hardening when grouting, nitrocarburising, nitriding and for other types of surface chemical-thermal treatment. It is used to make shafts, axles, gears, gear wheels, bolts, levers and other transport and machine-building components.
VIEW MORE +

40CrMnMo hot rolled steel round bars

40CrMnMo steel commonly used in the manufacture of heavy duty, larger cross-section of the gear shaft, gear, truck rear axle axle, shaft, eccentric shaft, connecting rod, turbine similar parts, can also be used instead of 40CrNiMo.
VIEW MORE +

Cr12MoV hot rolled steel round bars

Cr12MoV steel has high hardenability, and those with a cross-section of 300 to 400 mm or less can be completely quenched. It can maintain good hardness and wear resistance at 300 ~ 400℃, its toughness is higher than Cr12 steel, and its volume change is minimal during quenching. It can be used to manufacture various molds and tools with large cross-sections, complex shapes, and withstand large impact loads. For example, punching dies with complex shapes, inserts on complex dies, steel deep drawing dies, wire drawing dies, threaded wire plate, cold extrusion dies, cold cutting scissors, circular saws, standard tools, measuring tools, etc.
VIEW MORE +

3Cr2W8V hot rolled steel round bars

High temperature wear tests for 3Cr2W8V steel were performed by a pin-on-disk high temperature wear apparatus.The effects of quenching temperatures on wear resistance of 3Cr2W8V steel were studied.The compositions,images and structure of worn surfaces were analyzed using SEM,EDS and XRD.
VIEW MORE +

W18Cr4V hot rolled steel round bars

W18Cr4V is tungsten high-speed steel, with high hardness, red hardness and high temperature hardness. The wide range of heat treatment difficult to overheat quenching, heat treatment process is not easy oxidation and decarbonization, grinding performance is better. The hardness of the steel is maintained at HRC 63-64 and HRC 62-63 at 500 ° C and 600 ° C, respectively, and has good cutting performance for a large number of general materials to be processed.
VIEW MORE +
< 1...456...19 >